PAMSPAN 3000 User Manual
-4-
2. Hardware Setup
and Startup
_________________________________________________________________________________________
2.1 Front Panel LED and Rear Panel description
Following pictures are the front panel of 2-wire and 4-wire PAMSPAN3000 respectively.
Figure 2-1 4-wire PAMSPAN3000 Front Panel LED
Figure 2-2 2-wire PAMSPAN3000 Front Panel LED
1.
Power
Power Indicator
2. DSL 1
DSL loop1
3. DSL 2
DSL loop 2
On--- CPE
4. CPE
Off--- CO
5.
Ethernet Link On---
Ethernet Link connected
Figure 2-3 Rear Panel illustration
1. DC IN:
Power Adapter Input
2. Reset Button:
Reset device to factory default setting
3. Power Switch:
Switch for system turn on/turn off
4. LAN:
Connected to Ethernet Port
5. DSL 1 to 2
Connected to SHDSL Line 1 to 2
6. FGND
Connected to ground wire
7. Mode
Allow users to config rate and CO/CPE through Dip Switch
