C-Com PAMSPAN 3000, User Manual

Page: 64 / 64

PAMSPAN 3000 User Manual
-49-
Attribute Value Default
Auto Start “True” - A Connection will be established at power up.
“False” - The modem will remain in Idle mode at power
up. True
Activate Line false – normal operation
true – reset DSP false
CRCerrors c yclic r edundancy c heck errors occurred
SEGAerrors segment anomaly
LOSWerrors Loss of Sync Word error occurred
SNRLp1 Signal to Noise Ratio margin in loop 1
SNRLp2 Signal to Noise Ratio margin in loop 2
Atten Lp1 A value between 0dB and 12dB that indicates the
transmit power attenuation in loop1
Atten Lp2 A value between 0dB and 12dB that indicates the
transmit power attenuation in loop2
Physical Port A value between 0 and 14 that sets the Utopia Level 2
Utopia address 0
Port Speed Specifies the maximum aggregate transmit speed for the
port, specified in cells/second.
TxBurstSize Burst size (in cells) for unshaped traffic. See the ATM
Driver Tuning Guide (DO-008174-TC).
CACMode Call Access Control (CAC) mode.
Cbr_CPS Total allocated CBR bandwidth in cells per second (this
is used by CAC).
RvbrPCR_CPS Bandwidth allocated for rt-VBR PCR.
RbrPCR_CPS Bandwidth allocated for VBR PCR.
VbrPCR_CPS Bandwidth allocated for VBR PCR.
VbrSCR_CPS Bandwidth allocated for VBR SCR.
Ubr_CPS Total UBR bandwidth.
RingLength Size of timing ring for shaped traffic (determines
maximum delay for a channel).
VPIRange Number of bits of supported VPI range. The default
value of twelve indicates a VPI range of 0-4095.
VCIRange Number of bits of supported VCI range. The default
value of sixteen indicates a VCI range of 1-65535.
Application code may open a channel with a VCI in
range 1 = vci < VCIRange.
DefaultPCR Default PCR in cells/second of channels on this port
(only relevant for shaped traffic).
DefaultMaxQueue Default buffer queue depth of channels on this port.
TrafficShaping Whether traffic-shaping is enabled on the port.
NiType Whether received cell headers are treated as having
8-bit VPI (uni) or 12-bit VPI (nni).
SnmpIfIndex Unique value for interface (assigned by support library).
SnmpIfType IANAifType MIB-II interface type code.