PAMSPAN 3000 User Manual
-4-
•
Port Connection Status:
This section displays information about your port connections:
• Port; the ports available on your Router
• Type; the kind of traffic that can be transported on each port connected; which of the
ports on your Router are currently connected:
represents a port that is not connected
represents a port that is connected
•
WAN Status:
• IP Address Type; whether the WAN IP address is used or the address is obtained
dynamically from DHCP.
• WAN Subnet Mask
• Default Gateway; whether DHCP server has been configured to give out the WAN IP
address as the default Gateway address.
• Primary DNS; whether a Primary DNS IP address has been set. The WAN Status section
also provides two hyperlinks:
• IP Address Settings; this allows you to create, modify or delete your WAN configuration.
• DNS Client Settings; this allows you to create, modify or delete your DNS Client
configuration.
•
LAN Status:
This section displays the following status information about your Local Area Network
settings:
• LAN Subnet Mask
• Act as Local DHCP Server (Yes/No)
• MAC Address; this is the actual MAC address for the Ethernet block. You can configure
this Router to use the MAC address from the Ethernet NIC in the PC instead of its own
MAC address.
This is known as MAC Address Spoofing.
If you have configured MAC spoofing on the Router the MAC address shown in this table
will not be changed. This table will always show the true MAC address of the Router.
The LAN Status section also provides a DHCP Server Settings hyperlink that allows you to
configure your DHCP server status.
•
System Information:
This section displays the following status information about your Router:
• Up-Time; the length of time (in hours: minutes: seconds) that your current session has
