Double check that all connections are secure and are set up
according to the instructions. Turn the sensitivity control knob
clockwise until all segments of the display are lit, then continue to
turn the sensitivity control clockwise until all the indicator lights
go out. The point where the lights just extinguish is the point of
the highest sensitivity. This is much like setting the squelch on a
VHF Marine Radio. If a light stays on steadily, it indicates that
the sensitivity adjustment knob on the control module is set too
high, or there is a fault within the system.
Should you experience a problem with your C.A.R.D. System,
please call Survival Safety Engineering directly. We have
personnel that are specifically trained to help you at.
1- 888 - 475 - 5364
Safe Sailing ,
The Crew at Survival Safety Engineering
Page# 13
