m
aintenance
/ S
peciFicationS
p
recauTions
1) Please take care in the handling of this precision device. If the unit is dropped or subjected to extreme shock, the calibration
may be thrown off. Calibration problems due to abuse, or droppage may affect the warranty.
2) DO NOT expose the XGC-1e to water. It utilizes a ventilated enclosure to properly “sample” the CO
2
.
s
pecificaTions
:
System operating voltage
/- 20% @ 50-60 Hertz
Maximum Switching amperage
15-amps @ 120vac
Overload protection
15-amp normal blow fuse
Operating temperature
30-120º F
Maximum humidity
95% RH (Non-condensing)
Temperature control range
50-115º F with a 7º F differential, +/- 3.6º
Humidity control range
20 - 80% RH with a 5% differential
Adjustable timer repeatability
+/- .5% under fixed conditions
Timer setting accuracy
+/- 10%
Hydro “ON” timer
30 seconds to 20 minutes
Hydro “OFF” timer
12 minutes to 480 minutes
24-hour timeclock accuracy
+/- 3% monthly
CO
2
Operating principle
Fuzzy Logic™, w / Single-beam Non-Dispersive Infrared (NDIR)
CO
2
Measurement range
0 – 5000 PPM CO
2
CO
2
Warm-up time
Minimum 10 minutes (full accuracy)
CO
2
Maximum drift per year
+/- 15 PPM
CO
2
Accuracy @ 77’F
+/- 5% of reading
CO
2
Repeatability
< 1% of Fixed Scale
CO
2
Calibration interval
Three years
CO
2
sensor Operating life expectancy
15 years typical
Dimensions
10” X 8” X 7”
Weight
Less than 6 lbs.
Relay operations
Minimum 100,000 electrical / 10,000,000 mechanical
m
ainTenance
:
1) Consult the troubleshooting chart for a listing of the most common problems.
2) DO NOT open the enclosure!!! There are no components that require maintenance.
3) Do not use this equipment for purposes other than what it is designed for. It will provide many years of trouble-free service when
used properly.
4) In the event you cannot solve the problem, first consult the dealer who sold the unit then contact the factory for instructions on
how to return it to the factory for repair.
Published By R & M Supply Inc.
Copyright 2009 R & M Supply
All Rights Reserved.
Liability statement:
R & M Supply and their retailers and distributors are not responsible for any damage or injuries (consequential or otherwise) arising
from the use of this device. The purchaser assumes all responsibility for the use and proper installation of this device.
