BZBGEAR BZ-MVS8x8-4K
PRODUCT MANUAL
PC Tool
The PC tool does not need installation as well as supporting serial and network control.
UART Control
Connection via RS232
1.
Connect PC and device with a straight serial port cable.
2.
Run the PC control tool and select the "Matrix Switch" page.
3.
Click the radial in the "Ctrl Mode" section for "UART."
4.
Click the "Port" drop down box and select the currently used COM port for the device.
5.
Click the “Status” button to establish a connection to the device.
6.
If connected successfully, the "Disconnected" button will show "Connected"
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
11