BZBGEAR BG-ADAMO-4K
PRODUCT MANUAL
Z
ONE
T
RACKING
S
ETUP
●
Zone tracking must be set up using the
web interface. However, it can be
activated using the remote once the
setup process has been completed.
●
Using either the remote or web
interface, adjust the camera to the
desired shot.
●
Select “Set” to save the shot on the
desired region.
●
Preset images will be shown below the
preview image.
●
Click the Check box on the region to
enable tracking for the new zone and to
save the preset.
●
Perform the steps again for at least 1
more zone (up to 4).
Note
: Each preset preview image must be
continuous from left to right and overlap when
setting the tracking regions. See the picture
below for an example:
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
25
