BZBGEAR BG-ADAMO-4K
PRODUCT MANUAL
R
EMOTE
One-to-One Code Matching:
Out of the box the remote is automatically paired with the camera.
Should the camera need to be re-pair with the remote, perform the
steps below.
1. Press the "set" and " * " keys combined for 3 seconds. The
LED indicator will start flashing.
2. The camera will receive the signal and power on if not already
on.
3. The LED indicator will turn off if the code matching is
successful.
If the one-to-one code matching has failed, the LED indicator will
flash for 20 seconds and turn off. The camera will stop code
matching and go into sleep mode. Press any key to wake the camera
up and reattempt code matching.
R
EMOTE
B
UTTONS
I
NTRODUCTION
In this manual, “press the button” means a click rather than a “press and hold”. Special
instructions will be given if pressing and holding the button for more than one second is required.
When a button-combination is required, perform the actions in sequence.
For example,
【
*
】
+
【
#
】
+
【
F1
】
means press “
【
*
】
” first, then “
【
#
】
” and press “
【
F1
】
” last.
1. Camera Remote Control Address Setting
【
*
】
+
【＃】
+
【
F1
】
: Camera Address No.1
【
*
】
+
【＃】
+
【
F2
】
: Camera Address No. 2
【
*
】
+
【＃】
+
【
F3
】
: Camera Address No. 3
【
*
】
+
【＃】
+
【
F4
】
: Camera Address No. 4
2. Camera Selection
Select the camera’s address to control it.
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
14
