12
Status button:
Clicking this button will refresh currently network configuration
information to display in Status Log.
Status Log:
Display the Net configuration information.
port:
Set netport port value. The default value is 80.
Note: When you use the product alone, we suggest that you use the
default IP setting. If you cannot obtain the IP information as HDCP
setting, you can press the
“
RESET
”
button of the Encoder to recover
default IP address. The default IP address is 192.168.10.10.
Update page
Firmware update port, open a bin. file and then click
“
Upgrade
”
button to
update firmware.
Note:
When the update file is too large, the upgrade progress could stay a
long time in 99%. This is a normal phenomenon. Please do not turn off the
power or press the
“
RESET
”
button until the upgrade progress up to 100%.
