6
CAT cable for sending signal to Decoder.
Notice
: The CAT OUT is also a network port, it can
be connected directly PC (through corresponding
on-demand software such as VLC media player
software.) to output signal from HDMI IN port.
5
IR OUT
Connect to wideband IR blaster cable. The IR blaster
signal is from IR IN at the Decoder.
6
LINK LED
The LED will flash blue when Encoder is connected
Decoder or connected switcher / router / hub.
7
POWER LED
The LED will illuminate blue when the Encoder is
powered on.
8
DC 5V
Plug the DC 5V/1A power supply into the unit and
connect the adapter to an AC outlet.
5.2 Decoder Panel
Number
Name
Function description
1
HDMI OUT
Connect to HDMI display device such as TV or
monitor with an HDMI cable.
2
RESET button
▪
Press the button briefly to reset the product,
including IP address, encoding information and EDID.
The EDID will recover default status for
1920*1080@60Hz.
▪
Press the button up to 3 seconds to copy EDID
from Decoder display device to Encoder
’
s HDMI
source device.
3
CAT IN
The CAT IN port is connected CAT OUT port at the
Encoder or connected switcher / router / hub with
CAT cable for receiving Encoder signal.
4
IR IN
Connect to wideband IR receiver cable. The IR signal
is sent to IR OUT port at the Encoder.
5
LINK LED
The LED will flash blue when Decoder is connected
Encoder or connected switcher / router / hub.
6
POWER LED
The LED will illuminate blue when the Decoder is
