1.2 Power on initial configuration
1)
Power on: Connect DC12V power supply adapter with power supply socket.
2)
Initial configuration: Power on with power indicator light on and remote control receiver light blinking, camera head moves from
bottom left to the bottom, and then goes to the HOME position (intermediate position of both horizontal and vertical), while the
camera module stretches. When remote control receiver light stops blinking, the self-checking is finished
Note: If you set preset 0, when Power on self-test is completed, the camera automatically moves to the preset 0 position.
1.3 Video Output
This model has video outputs from NDI-LAN, HDMI and 3G-SDI.
1)
Video Output from NDI |HX LAN
a. Network Cable Connection Port: No.12 in Figure1.1
b. Webpage Login: Open your browser and enter 192.168.5.163 in the address bar (factory default); press Enter to reach the login
page; click on “player is not installed, please download and install!" and follow the steps to install the plugin. When complete
enter the username
admin
and password
admin
(factory default) and press Enter to reach the preview page. From here users
can carry out PTZ control, system configuration and other operations.
2)
HDMI Video Output
a. HDMI Video Cable Connection: refer to No.11 in Figure1.1.
b. Connect the camera and the monitor via HDMI video cable; video output is available after camera self-test.
3) 3G-SDI Video Output
a. 3G-SDI video cable connection: refer to No.10 in Figure1.1
b. Connect the camera and the monitor via 3G-SDI video cable; video output is available after camera self-test.
1.4 Bracket mount
Note: Bracket can be wall or ceiling mounted. Ensure bracket is securely fastened to a solid surface such as wood or concrete.
Do not
fasten to drywall
or bracket may come loose and damage or destroy the camera.
1) Wall mount guide
