5
/
11
HDMI OUT: Local HDMI loop output port.
HDMI IN: HDMI Input port. Connect source with HDMI cable.
IR OUT: Connect the IR Blaster cable included in the package for IR
signal transmission. Pace the IR blaster in direct line-of-sight of the
equipment to be controlled.
EDID: Select output signal format via EDID Selector.
※See the
description 1
UPDATE: System software update.
DC12V: Plug the 12V2.5A DC power supply into the unit.
POWER OFF/ON: Power ON\OFF Switch.
5.2
Receiver
EQ switcher: HDMI Receiver equalizer switcher.
※See the
description 2
HDMI out: This slot is to connect the HDMI input port of your display such
as an HDTV.
IR In: Connect to the IR Receiver for IR signal reception. Ensure that
remote being used is within the direct line-of-sight of the IR receiver.
Power LED: This LED will illuminate when the device is connected with
power supply.
CAT: Connect the CAT input of the receiver with the CAT output of the
transmitter with CAT5E/6 cable.
Lock LED: This LED will illuminate when the HDMI signal from the
transmitter is stable.
