CFG_ CHANM_H
17
Configurable Channel Mask is a UInt32 bit-field
that represents the allowed channels the
wireless device is permitted to use to search
for gateways. If the value is written to
0x00000011, then the network is only allowed
to be established on channels 1 and 4.
CFG_ CHANM_L
18
CFG_INTERVAL_
LINK
19
Configurable Interval Link represents the
device’s link-state sleep time. If the device
disconnects from its current network (e.g.
failures, reset), it will scan permitted channels
for a new link. If no gateway is found, then this
specified period of time is waited before
attempting to relink. This value is a UInt16 that
is interpreted as follows:
- CFG_LINKHB <= 18, value is in hours.
(1-18 HRS)
- CFG_LINKHB > 100. value is in minutes.
(105 = 5 MIN)
-
If 0 or Otherwise, 2HR default
CFG_ INTERVAL_
STANDARD
20
Configurable Interval for Standard Reports is
the regular check-in interval for the wireless
device (based on timer, not events).
Format: UInt16 number of seconds to wait
before checking in.
CFG_ INTERVAL_
EXCEPTION
21
Configurable Interval for Exception Reports is
the check-in interval used during exception
cases (based on timer, not events).
Format: UInt16 number of seconds to wait
before checking in.
CFG_ RETRIES
22
Configurable Retry Limit represents the
number of attempts made by the device to
deliver its data when the primary attempt fails.
Value of 0 – 10 inclusive are permitted.
CFG_ FAIL_LIM
23
Configurable Fail Limit represents the number
of report attempts that can fail consecutively
before the sensor drops current gateway
connection, resets to link mode and re-scans
for a better connection. Value of 1-10 inclusive
are permitted for the relink behavior. If value is
0, then this behavior is disabled and only a
power-cycle can reset the device’s link
settings.
- 31 -
