PoE
ENDSPAN
MIDSPAN
PoE
Test example #1.
Using a Single Port test to determine a PC or
Hub/Switch's capabilities.
Tests if a LAN port is ON and capable
of transmitting; verifies its Device Type (hub/switch or PC); displays
its Speed and Duplex (a 10,100,1000 device lights all 3 speed
LEDs); and displays PoE. Full duplex includes half duplex.
Equipment required: The TVR1000 Main Unit and a straight thru
RJ45 patch cable.
Step 1: Turn ON tester.
Step 2. Make connections:
Connect the LAN device directly to the
TVR1000’s GREEN JACK using a straight thru RJ45 patch cable.
Step 3:
ACTIVITY AND DEVICE TYPE TEST.
Any activity on
the DATA and LINK LEDs indicate that the LAN device is ON and
transmitting. The DEVICE TYPE is displayed on the “DATA/LINK”
LEDs indicating a “HUB” or a “PC”. If it indicates what you expect,
all is well. If it indicates the opposite, a crossover cable might exist
somewhere between the LAN device and the tester. This is not
necessarily bad, but it is something to take into consideration when
diagnosing problems that might occur.
Plug into
green jack
PC or hub/switch
Straight thru patch cable
(included)
Test example #1
Single port test
22
