p8.
Technical Data
Outdoor Unit
Indoor Unit
Operating voltage
Current consumption
120 mA (IR On: 150mA)
400 mA
Transmitting frequency
2.4GHz~2.483GHz
2.4GHz~2.483GHz
Modulation
FM
Channels
3
3
Light sensitivity
2~20 Lux
Picture sensor
433 MHz
Hidden Antenna
Dipole Antenna
433 MHz
Resolution
330 TV lines (horizontal),
Microphone
mono
Picture
Colour
Range
Anti-theft Function Frequency
Antenna
approx 100 m at free visibility
Operating temperature
14 to 122∞F/ -10∞C to +50∞C
Mass approx. (without tripod)
140g
336.5g
Dimensions without Aerial
75 x 33 x 130 (mm)
L x W x H
100 x 38 x 40 (mm)
L x W x H
1/3î CMOS colour
628x562 pixel (300K pixels)
7.5V DC/ 300mA
(plug-in powerunit)
(6PCS AA Alkaline battery)
7.5V DC/ 800mA
(plug-in power unit)
(4PCS AAA Alkaline battery)
7
3
2
1
4
6
5
paper
nameplate
Plug the paper nameplate
p5.
Byron SX303 Component Parts
1. 2.4GHz wireless video Outdoor bell push
2. 2.5" wireless video receiver
3. Plug-in adapter for wireless video bell push
4. Plug-in adapter for Video Receiver
5. Hardware pack
Installation: Wireless Video Bell Push
1. Power ON(Green) /
Battery Low(RED)
2. IR LED
3. CDS
4. Call Button
5. Microphone
6. Weatherproof Name Plate
7. Adaptor
Before install the camera bell push into the require location check to make sure that the units
are operating correctly, select a location that is dry with good air circulation, free from excessive
dust and excessive vibration.
It's recommended the video bell push is mounted at least 1.6m from the ground.
Avoid locating the Video bell push onto metallic or reinforced concert surfaces and away from
metal shelving, mirrors, microwave ovens and wire free networks (WiFi) as with will reduce the
operating distance.
1. Remove the anti-theft screws from the base of the video bell push and remove the back plate.
Using the back plate as a template drill 4 suitable holes and attach the base plate to the wall
using the screws and wall plugs provided.
8. Channel Switch
8
