3. Rate - 2 o'clock
4. Mix - noon
5. Phase stage switch - 4 (to the right)
Plug into your guitar and amp. Make sure bypass works. Make sure you have power to
the pedal and the LED comes on. You should hear a clean uneffected guitar signal. Now
turn the trimpot untill you hear the phase kick in. Fine tune to tast.
STEP 8: Add the aluminum electrolytic capacitors. These are polarized. The positive
end will have a longer lead and should go in the square solder pad. The negative end will
have a shorter lead with a black strip running down the body of the capacitor.
