STEP 4: Add the 8 pin IC sockets.
ONLY SOLDER THE SOCKET! NOT THE
ACTUAL IC!
These are sockets. The sockets get soldered to the PCB. The ICs get
inserted into the sockets. The actual IC chips themselves, never get soldered. You will
insert the ICs into the sockets after the entire pedal has been built.
Only add the 4 sockets that go on the top of the PCB. Do not add the 5th socket that goes
on the bottom yet. Orient the sockets so that the side with the notch matches up with the
notch on the PCB layout.
