BYK micro-TRI-color, Operating Instructions Manual

Page: 28 / 56

5 | Measure BYK-Gardner GmbH
28 micro-TRI-color 300 100 114 E 2103
6. Repeat step two as many times as you customized the number of single mea-
surements for the sample measurement. Default number of measurements is
three.
7. The screen below is displayed.
Illustration 25: Allocation of a desired name or usage of predefined name
8. Allocate a name for the measurement by clicking on the name field and enter
the desired name. You can also accept the predefined name (“Sample” and an
incrementing number) by clicking on the checkmark in the upper right corner.
Illustration 26: Input of a desired name
9. Click on the checkmark in the upper right corner .
The measurements are finished. The average values are stored in the instrument
memory.
5.2 Measure with Worklist
In order to organize the working procedure, you can predefine a worklist in your
individual software and download it to the instrument. A worklist consists the
names of samples you want to measure – for example “Car 1” or “Red Audi”.
Once a worklist is downloaded to the instrument, you can select the appropriate
name of the sample you want to measure. The instrument will link the measured
values with the predefined names.
Prerequisite: You are familiar with Measure without Worklist [ } 27] .