48
MINI ES internal cable connection check
According to the internal connection port instructions, visually check if the location of the
connections and schematics correspond. Check as below:
Internal cable connection check
No.
Contents
Requirements
Results
1
Grid cable
Connection locations of active
line, neutral line and PE line
correspond to the schematic
2
Load cable
Connection locations of L line,
N line and PE line correspond
the schematic
Cable connection check
According to the internal connection port instruction, visually check if the cable connection
ports and schematics correspond, and confirm the communication line is able to access
the Internet. Check as below:
Cable connection check
No.
Contents
Requirements
Results
1
Cable connection
Keep consistent with schematic
2
signal stability
Can normally communicate
3
internet access
Customers can access the
internet.
Supply power and start
Close the MINI ES circuit breaker for the AC grid to supply power to the MINI ES.
Press
“Power” button for 10s and start the system
Check
“
POWER
”
“
LOCAL
”
indicator;
Normal condition
：
“
POWER
”
and
“LOCAL” indicator or only “POWER” indicator keeps on,
at the same time. Display as follow.
POWER
LOCAL
REMOTE
POWER
LOCAL
REMOTE
Normal state
Fault condition:
“POWER”
、
“LOCAL” and “REMOTE” keep on for over 2mins during
starting the system or three indicators keep on during system is operating.
Only the
“LOCAL” keeps on. (Not connect to grid or no electricity power from grid)
Record results are as follows:
Start-up check
No.
Contents
Requirements
Results
