background image

ECB16   ECB18

61

OM-ECB162015006-EN-US

Fingertip Control

1

2

3

4

5

6

7

1. 

Lift: push the button forward to lower, pull the button backward to lift.

2. 

Tilt: push the button forward to tilt forward, pull the button backward to tilt backward.

3. 

 Side Shift: push the button forward to shift leftward, pull the button backward to tilt shift 
rightward.

4. 

Other Attachments: According to the specific attachment.

5. 

 Emergency Disconnect Switch: Press down the emergency disconnect switch when there 
is an emergency, press down the emergency disconnect switch to cut off the power.Pull 
up the emergency disconnect switch and it will connect the power of the forklift and the 
forklift will enter into standby status.

6. 

Travel direction control button.

7. 

Horn button.

CAUTION

1. 

 Incorrect operation with Emergency Disconnect Switch might cause an accident and 
damage the electrical system.

2. 

 Before switching on the forklift, please pull up the Emergency Disconnect Switch first and 
then turn the switch key.

https://www.forkliftpdfmanuals.com/

Summary of Contents for ECB16





















































































































Reviews: