BYD ECB16 Operator'S Manual Download Page 37

Page: 37 / 116

ECB16 ECB18

OM-ECB162015006-EN-US

Do not operate the forklift after drinking. It might cause severe human injuries.

CAUTION

Read through the operation instructions before operating the forklift.

Operators should wear working boots and working clothes.

Do not operate the forklift with wet or greased hands.

Conduct the daily checking and regular maintenance on the forklift.

Stop operating the forklift when the abnormalities and damages are found on the forklift.
Do not use the forklift until the forklift is fully repaired.

Warning decals and signs

The BYD forklifts have warning decals and signs to remind the operators of potential risks, as

well as safety notices. Find and read all these decals and signs.

If the warning decals and signs are missing or difficult to read, please contact your local BYD

dealer for immediate replacement.

https://www.forkliftpdfmanuals.com/

Summary of Contents for ECB16





















































































































Search results

Summary of Contents for ECB16

Reviews:

Related manuals for ECB16

Brands by name

Popular brands

BYD ECB16, Operator'S Manual

Search results

Summary of Contents for ECB16

Reviews:

Related manuals for ECB16

Brands by name

Popular brands