MR36 User Manual
10
© BWA Technology GmbH
2.10. User interfaces (Connectors)
On the back panel of MR36 the following connectors are located:
•
one RJ12 connector (PWR) – for connection of the power supply adapter,
•
one RJ45 connector (ETH) – for connection into the local computer network,
•
one RJ45 connector (PORT1) – for one-cable connection to DiREX-Pro DVR,
•
one FME or SMA connector (ANT) – for connection of the antenna,
•
one USB-A Host connector (USB) – for connection of the devices to the router, e.g. GPS.
2.10.1.
Connection of the PWR Supply Connector
Panel socket RJ12.
Pin
number
Signal
mark
Description
1
+UN
Positive pole of DC supply voltage (10 to 30 V)
2
NC
Signal not connected
3
NC
Signal not connected
4
+UN
Positive pole of DC supply voltage (10 to 30 V)
5
GND
Negative pole of DC supply voltage
6
GND
Negative pole of DC supply voltage