The device may only be operated when fully assembled with the factory accessories! If any part is damaged,
it must be replaced before use. Allow the appliance to cool down completely in a well-ventilated place
before storing it. Clean the grill plate after each use.
CAUTION
General advice:
Do not use the device if you have previously dropped or struck it and it is visibly damaged!
Do not use the device if you experience any abnormal operation! It is strictly forbidden to use, modify or
disable safety devices as intended!
Opertaion:
Always operate and store the device as described! Always check the integrity of the device,
cable, plug and accessories! Do not use the device in case of damage! The device may only be operated on
a stable, level surface. When using and maintaining the device, make sure that you keep your balance and
stable position!
ATTENTION
Operation:
Use the appliance only above freezing temperatures 0 °C to avoid condensation and electric
shock. Never leave the appliance unattended when it is connected to the mains! Do not use the appliance
for heating or evaporating! Protect the device from moisture and water! Do not store the device outdoors
in high temperatures. Do not use metal kitchen utensils when using the appliance, as this may damage the
surface.
USER MANUAL
General instructions
Read the following user guide and safety warnings carefully before using the machine! Proceed as described
here during use! Please keep this manual for future reference! If you lend the device to someone else, please
attach this documentation.
The device is designed for residential use! The device may only be used with factory accessories! Do not
disassemble or modify the device! In the event of a malfunction, contact a specialist who can only repair the
device with original parts! Please follow the safety instructions!
Symbols on the device
Risk of burns, the surface of the device may become hot during use!
Read the instructions for use and proceed as described
First use
Remove all factory packaging from the device. Wipe the grill surface with a slightly damp cloth.
Connect the device control unit to the corresponding socket on the housing (2-pin connector). Check
that the power control rotary switch is „0”, ie off. Connect the machine’s power cord to an AC outlet.
Turn the thermostat switch to the desired power level and the appliance will start heating up.
This is also indicated by the control indicator. During the first start-up, minimal smoke may escape from the
appliance.