BW Technologies GasAlertMicro 1, User Manual

Page: 74 / 76

GasAlertMicro
Users Manual
•
Insert the MMC card back into the detector.
•
Allow the detector to reformat the MMC card.
•
Remove the MMC card from detector.
•
Insert the MMC card back into card reader.
•
Select the My Computer icon.
•
Select the drive that corresponds to the card reader.
•
The Recorded Data File (Logfile.csv), will now be visible.
If the Recorded Data File is still not visible, insert the MMC
into the detector and turn it on. The LCD will advise:
Error.
Data file has been deleted . You will then be
given the choice of erasing or restoring the data. Use
G
or
H
to scroll through the options. Press
C
to confirm your
choice.
To restore the data, select Restore The detector will then
restore the data to the MMC, and will resume the start-up
procedure.
To permanently erase the data on the MMC, select Erase .
The display will then read, Are you sure? .
Note: once data is erased using this process, it cannot be
retrieved.
Press
C
to confirm your choice or
A
to abort. If you choose
to abort the erasing procedure, the display will read,
Erase
aborted .
The display will then read Note: Card cannot be
used Pull out card to continue
. Insert a new
card or erase the data. Once you confirm your decision to
erase the data on the MMC or there is a new card inserted
the detector will resume normal operation.
62