BW Technologies CONNEX1, Operator'S Manual

Page: 35 / 72

ConneX1 Operator’s Manual
25
Review Mode
8.4 Review Mode
In Review Mode, the user can view the
s 8.4.1 Gas Exposure on page 25
s 8.4.2 Sensor Configuration on page 25
s
8.4.3 Detector Information on page 25
s
8.4.4 Messages on page 25
Press to enter Review Mode.
8.4.1 Gas Exposure
Viewing gas exposure readings for the sensor, shows the
s
peak reading
s
minimum reading
s STEL reading (only applicable for toxic sensor)
s TWA reading (only applicable for toxic sensor)
Press or to scroll through the gas exposures.
To reset the peak gas exposures, press when prompted.
8.4.2 Sensor Details
The information can also be viewed/altered in Fleet Manager II.
s
Measuring range
s
Low Alarm setpoint
s
High Alarm setpoint
s TWA alarm setpoint
s
STEL Alarm setpoint
s
Calibration due date
s Bump test due date
8.4.3 Detector Details
The following information details the detector settings.
The following information can also be viewed or changed in Fleet Manager.
s Current operator and location
s
Current profile and operation mode
s
Owner and WiFi status
s
Software version, hardware revision, and serial number
s MAC address, IP address, and WiFi network name
s Distributor details
s Date format
s Time format
8.4.4 Messages
s
Messages received from LocaXion Manager
s
Messages sent to LocaXion Manager
9. Calibration
A calibration is performed to adjust the sensitivity levels of the sensor to ensure
accurate responses to gas.
9.1 Calibration Using the IntelliDoX