background image

Version 202001 Updated 08/2020

23

3. Place an oil pan under the engine to catch the oil. Remove the oil drain

bolt (as displayed in Pic. 22.2) to drain the oil fully. A tube or similar device

is recommended to avoid spilling the oil.
4. Check the oil drain plug, gasket, and oil filler cap to ensure each part is

not damaged.
5. Add fresh engine oil up to the upper level of the dipstick (approximately

0.6L), as seen in Pic. 23.

8.1.3.3. AIR FILTER

After approximately 50 hours of use, or every month (whichever is sooner),

the air filter should be removed and cleaned thoroughly. During this

cleaning process, the air filter should also be thoroughly inspected for

damages and deteriorations. We recommend a water-based degreasing

agent. Allow to dry fully before replacing the air filter.

NOTE:

Never attempt to run the machine without an air filter inserted.

8.1.3.4. FUEL FILTER

After approximately 100 hours of use, or every 3 months (whichever is

sooner), the fuel filter should be removed and cleaned thoroughly. The fuel

filter is displayed in Pic. 24. As with cleaning the air filter, we recommend

cleaning the fuel filter with a water-based degreasing agent.

Pic. 25

24.2

23.1

Pic. 24

Pic. 23

24.1

23.1

Summary of Contents for Greatbull GBK65 Series




































Reviews: