Version 202001 Updated 08/2020
１５
Keep yourself at least 3 meters from the refuelling area before starting the
machine.
Add fuel before starting the machine. Never remove the fuel tank cap while
the engine is running or when the machine is hot.
Do not use fuels such as ethanol or methanol.These fuels will damage the
engine of the machine.
6.2.2. ENGINE OIL
For transportation reasons, your machine’s engine comes from the factory
without any oil in it. Before starting the engine for the first time you must
put oil the engine.
This engine uses quality 4-stroke SAE30/10W30 oil, depending on the model.
Filling the oil sump:
- Place the machine on a flat, horizontal and uncluttered surface.
- Unscrew the oil filler cap.
- Add 0.6L of oil.
- Wait 1 minute for the oil to completely go down to the crankcase.
- Clean the dipstick from the oil with a cloth.
- Insert the rod and screw on the oil cap.
- Unscrew the plug again and check the mark left by oil on the dipstick. The
mark left by the oil must be between the minimum and maximum marks.
- If the mark is below the minimum, add a little bit more oil and recheck.
Pic. 10
