BW Broadcast TX V2, Technical Manual

Page: 38 / 89

7.5.7 HTTP
V2 Transmitters provide a graphical web based interface for ease of use and control. This
can be accessed by navigating to the IP address of the unit in any standard web browser.
After entering the login details for the unit, the user can then read and write all parameters
and also perform firmware upgrades. All parameters are saved and updated dynamically
as they are changed in the remote.
Ensure the unit is connected to an Ethernet socket and Ethernet is set up correctly to use this
feature.
By default, HTTP is enabled and running on port 80. In order to change these settings:
1. Navigate to System
⇒
HTTP .
2. Set Enable to Disabled .
3. Set the Webserver TCP port number in Port .
4. Set Enable to Enabled .
5. The Remote Control Indication parameter can be set to Enabled or Disabled . If set to
Enabled , the system will show a message on the screen when being controlled through
the web remote.
For further information on how to use the web remote, please refer to the ”Web Remote
Tutorial” section.
7.5.8 Telnet
V2 Transmitters offer many options for remote monitoring and control. All parameters avail-
able on the front panel are available remotely. For text based access via a local network or
the internet, Telnet can be used to connect to the unit. By default, Telnet is enabled on port
23. In order to change these settings:
1. Navigate to System
⇒
Telnet .
2. Set Enable to Disabled .
3. Set the required Port number.
4. Set Enable to Enabled .
For further information on how to use the Telnet remote, refer to the ”Text Based Access” sec-
tion.
38