BW Broadcast TX V2, Technical Manual

Page: 36 / 89

7.5.3 Screen Saver
1. Select the Screen Saver time-out before the Screensaver starts.
2. Enable or disable Screen Lock as required. If enabled, enter the desired 4 digit Screen
Lock Code . This code will be requested in order to exit the screen saver screen.
7.5.4 Users
1. Enter the Username for the remote login.
2. Enter the Password for the remote login.
7.5.5 Ethernet
Enable or Disable DHCP as required.
With DHCP set to off (Static IP):
1. Enter the Static IP
2. Enter the Static SM
3. Enter the Static GW
4. Enter the Static DNS 1
5. Enter the Static DNS 2
6. The MAC address of the unit is displayed here and can be used for setting up the net-
work.
With DHCP set to on (Static IP):
1. The system will take some time (usually a few seconds, depending on the network
setup) to gather the required IP configuration from the DHCP server.
2. Once the unit has received the IP configuration information, it will display it in the follow-
ing parameters: DHCP IP , DHCP SM , DHCP GW , DHCP DNS 1 , DHCP DNS 2 .
3. The ”Static” Parameters are shown but are not used.
36