Software Update
10
S
OFTWARE
U
PDATE
The RBRX1 is designed to allow features to be added to the unit in the field via a software update mechanism.
Software updates are available from www.bwbroadcast.com. To update your unit follow the procedure below.
U
PDATING
S
OFTWARE
V
IA
USB
1. Connect the RBRX1 to your computer using a USB Type A to USB Type B cable.
2. The RBRX1 will appear as a mass storage device named 'RBRX1'. This can be found in 'My Computer' on
computers running Microsoft Windows.
3. Browse the file system of the receiver by double clicking on the 'RBRX1' device, and open the 'upgrade'
directory. Place the .dat file in this 'upgrade' directory.
5. Disconnect the electricity supply from the unit by removing the power lead.
6. Wait for unit to power off.
7. Reconnect the electricity supply to the unit.
6. Observe the front LED display to ensure the upgrade completes sucsessfully.
U
PDATING
S
OFTWARE
V
IA
E
THERNET
The RBRX1 can be assigned a static IP address or may be configured to obtain an IP address automatically
using DHCP. You should contact your IT administrator for advice on how best to configure the unit for your
network.
S
TATIC
IP A
DDRESS
:
1.
Set DHCP to 'OFF'
2.
Navigate to the ethernet menu (in system menu).
3.
Set the IP address, Default Gateway and Subnet mask
4.
It is recommended that you set the port to '80'
DHCP:
1.
Set DHCP to 'ON'
2.
Within a few minutes the unit should display the IP address, Default Gateway and Subnet mask which the
DHCP server has supplied
3.
It is recommended that you set the port to '80'
U
PDATE
P
ROCEDURE
:
1.
Configure ethernet connection using chosen method above.
2
. Using a web browser on a PC, connect to the IP address that you have configured the RBRX1 to use.
3.
Click on 'Upgrade'.
4.
Follow the webpage's instructions.
Summary of Contents for RBRX1
Page 23: ...www bwbroadcast com ...
