BW Broadcast RBRX1, Preliminary Manual

Page: 11 / 23

Quickstart
11
Q
UICK START
1.
Install the RBRX1 into the rack.
2
. Connect AC power to the unit, and turn on the power.
3.
Connect an antenna to RF In connector.
4. Connect the appropriate audio outputs.
4.
Set the frequency.
FM
REBROADCASTING USE
:
5
. Turn de-emphasis off (audio menu).
6
. If you are using the MPX Output (preferred), navigate to the ‘STEREO MPX’ menu (in outputs menu), set the
'MPX Generator' to 'RADIO' and adjust the ‘MPX LEVEL’ to match the transmitter (or link device) that follows the
receiver. Adjust for 100% modulation with audio.
7
. Select a factory preset (see Managing presets).
AF
USE
(O
FF
-
AIR
M
ONITORING
):
5
. Turn de-emphasis on (audio menu).
6
. Connect the audio and/or digital outputs as required, navigate to the Analog or Digital menu (in outputs menu),
set the output to 'RADIO' and the output levels for the analogue and digital outputs to match the equipment that
the processor is connected to.
7
. Select a factory preset (see Managing presets).
NOTE: The front panel headphone jack connects to the analogue outputs so the sound may be excessively
bright if de-emphasis is set to 'off'.