9 - 1
Presets Configuration
9
9.1 THE PRESETS MENU
The DSPXtra-AM Encore features 20 factory presets, and up to 10 user presets.
The factory presets can be used as a starting point in creating your own customised user
preset.
The presets are accessed as follows:
From the home screen, highlight the ‘presets’ button, and press the knob.
You will be presented with the following screen:
This shows the list of presets – those prefixed with the letter F are factory presets, the prefix
U indicates a user preset location.
The rest of the preset locations will become visible if you scroll down the list.
To the left of each preset name is the ‘status block’.
The current preset is shown highlighted – if you scroll away from this, the status block to
the left of the preset name remains filled to indicate that this is the preset that is currently
loaded.
If this block shows the letter A, this indicates that the preset has been selected by an
‘action’ from the ‘events’ section of the
DSPXtra-AM Encore
(see section 8 in this
manual).
If the block shows the letter S, the preset has been selected by a ‘schedule’ event.
If a preset has been edited but not saved, an asterisk * is shown in this block.
If multiple statuses are active, the priority is: A, S, *, .
