BVM SCode User Manual Download Page 62

Page: 62 / 143

62 / 143

Chapter 6 Playback

to run the playback program.

Fast search panel

Operation panel

Information window

Function panel

Image window

File window

(The Function panel is hidden by

)

After this playback program is executed, the Fast search panel goes into All File Search
Mode and automatically lists all video files in the file window, during this day. If there are
no files, this

file window

will show empty.

This playback program can play multiple video files at the some time.

■

(Power off) :

Click the button to close the Playback program.

At the right –up corner, there are 2 buttons :

■

(Power off) :

Click the button to close the Playback program.

■

(Minimize) :

Click the button to reduce the Playback program to minimum size.

Summary of Contents for SCode
















































































































































Search results

Summary of Contents for SCode

Reviews:

Related manuals for SCode

Brands by name

Popular brands

BVM SCode, User Manual

Search results

Summary of Contents for SCode

Reviews:

Related manuals for SCode

Brands by name

Popular brands