manualshive.com logo in svg

BVM SCode, User Manual, Page: 6 / 143

Share
Download
BVM SCode User Manual Download Page 6

6 / 143 

1.1.3  Remote access 

Here below is an example of 

SCode RMS

 (Remote Monitoring System) network structure:  

 

SCode RMS has 4 unites : 

■

 

SCode DVR

 

■

 

SCode Client

 

 It is a computer where the 

SCode Client

 program is installed. To observe from a remote 

site, you just install the Client program on a suitable computer or a portable device. 

■

 

SCode Server

 

It is a computer where the 

SCode Server

 Program is installed. SCode Server program is 

usually run on a dedicated server embedded in a LAN or WAN of

 

SCode DVRs, to 

facilitate the communication and data traffic with the client SCode DVRs, however the 
SCode Server program and SCode Client

 

program can be installed together on a single 

SCode DVR when standing alone. 

■

 

SCode Center Server 

It is a computer where the 

SCode Server

 Program is installed. And this SCode Server is 

appointed as a center server. 

The communication is controlled by the

 

SCode

 

Server. SCode Client software provides the 

tools for the remote access. SCode

 

DVRs can be accessed by one, or more SCode Clients, 

simultaneously. With SCode Client, you can access the remote SCode

 

DVRs in your local 

network by through SCode

 

Server; or you can link direct to other remote

 

SCode

 

Servers and 

go into their network to access SCode

 

DVRs, or you can link to SCode Center

 

Server and go 

into its sub-server to access SCode

 

DVRs, giving you the capability to monitor and operate 

thousands of cameras, and manage their systems from one centre. 

1.1.4  Installation steps 

Put the SCode SP-5200 capture card into a PCI slot and Window’s

 Add New Hardware 

Wizard

 will help you to copy the provided system-ware from the installation CD. Then run 

the installation program to install the SCode drivers. 

Summary of Contents for SCode
















































































































































Reviews:

No comments