36 / 143
To delete an old storage directory, select a directory and click
Delete
.
When the 1st HHD is full, the system will jump automatically to the next disk installed
in the system.
Note 1
: if the default folder D:\ is not existed in your computer, the system will not
allow you to execute the recording function.
Note 2
: There is at least one folder in the table. If you don’t have D:\ and you want to
change to other existed folder, you need add the new folder first. And then,
delete the default folder.
Note 3
: It is not allowed to change this setting when any camera is in recording mode.
You must stop all recording first.
■
File length
This setting is used to set up the length of the video files. The system will create
periodical video files of this length. When the recording of video film has met the length
setting, the system will create a video file.
Note
: If the camera is in recording mode, new parameters will be applied after the
system starts to create a new video file.
■
Reserved space
This setting is to reserve minimum storage space on each HDD. When the remaining
available space on a disk drops below to the set value, the system automatically jumps to
the next HDD.
■
Recyclable recording
When all HDDs are full, if this is enabled, it will execute the recyclable recording. The
system will delete the oldest day’s video files and starts to overwrite on the new space.
■
Hard Disk full alarm function
When all HDDs are full, if this function is enabled and the recyclable recording is
disabled, the system sounds an alarm with the preset warning sound. The user can select
a preferred sound. If you want to change the sound, click
, it will show :
Select a sound. The selected sound has to be of the standard WAV file (
.
WAV).
You can also use the normal audio recording program to produce an alarm sound
yourself. The sound however has to be saved as a standard WAV file.
If you want to check the selected sound, click
Preview
.