BVM®2016
8
09/14/2016
Assemble the brass tubes per instructions
that come with the Metal Cap Fittings.
Bend as shown and bevel the top ends
with a file so that the fuel from the main
tanks flows freely. The brass clunk should
reach within 1/2” of rear of the tank and still
touch the tank bottom.
The two top tubes accept fuel from the two
main tanks. The third brass tube from the
clunk line feeds into one brass fitting on
the UAT. The length of the flexible clunk
line is 3.25”.
Header Tank is shown ready to install into
model.
