BVM®2016
9
09/14/2016
Battery Mounting Tray (RX Batteries)
Apply a ZAP finish to the top side of the
1/4” ply battery tray to allow better
adhesion of the white Velcro tape. This
part is supplied with the BVM Instruction
Manual Package.
Drill (2) 1/16” holes just above the 1/4” ply
tray.
Install (2) #2 servo screws to trap the tray
on the Fwd. end. Drill (2) 1/16” holes
through former into the aft end of the tray
to secure the aft end.
