www.buyersproducts.com
Phone (440) 974-8888
Fax 800-841-8003
—continued inside
Installation Instructions
85104
69" x 23.5"
Fits full-size pickup trucks with cab heights of 24" above bed.
Fig. 1
Bracket, Top View
Ford:
F-150,1997-Present
F250/350 Super Duty Reg. Cab, 1997-99
Chevy/GMC:
1500/2500 Reg. Cab, Ext. Cab & Crew Cab,
1999-Present
Dodge Ram:
1500 Reg. Cab, 1997-2001
1500 Quad Cab, 1997-2000
1500 Quad Cab, (155” wheel base only) 2001
2500 Reg. Cab, 1997-2001
85204
71.6" x 26.3"
Fits full-size pickup trucks with cab heights of 26" above bed.
Ford:
F-250 Super Duty Reg. Cab, Super Cab & Crew Cab, 2003-Present
F-350 Super Duty Reg. Cab, Super Cab & Crew Cab, 2003-Present
Chevy/GMC:
2500HD all cab styles, 2003-present
3500 all cab styles, 2003-present
Dodge Ram:
1500 Quad Cab, 2001-present
2500 Reg. Cab, 2002-present
3500 Reg. Cab & Quad Cab, 2003-present
Mega Cab, 2006
KabGard
™
CAUTION
• Park your vehicle on flat, horizontal surface. Apply parking
brake or use wheel chocks to prevent accidental rolling.
• To keep debris out of your eyes always wear protective
eyewear.
• Tighten screws and nuts only when it is recommended by
these instructions.
• Check contents of box against part list to make sure all
components are included
IMPORTANT: Prior to installation, check owner’s manual or
contact your truck manufacturer for all necessary pickup
box reinforcement kits. Always install recommended kits
prior to window protector installation. Failure to follow this
procedure may void truck’s warranty. Never exceed
recommended maximum combined weight of equipment
and cargo, recommended by truck’s manufacturer.
Place installation instructions and warranty information in
vehicle glove box after installation.
Tools Required
• 3/4" Open or Socket Wrench (2)
• Electric Drill
• 3/4" Drill Bit
1.
Determine which hole on the bracket to be used. Mark the
appropriate hole for your vehicle on both brackets.
See Fig. 1
2.
Apply adhesive cushions to brackets. Punch holes in cush-
ions according to marked holes in brackets.
See Fig. 2
3.
Attach anchors to brackets using 1/2-13 x 4" fully threaded
screws. Do not tighten screws. Make only 3-5 turns into
anchor’s short side nut.
See Fig. 3
Standard Mount
Dodge 2002-Pres.
Ford F-250/350
Ford F150
Chevy/GMC
Dodge 1997-2001
Fig. 2
Bracket
Cushion
Adhesive Side
For KabGard
™
accessories see pages 3-4
1
