www.buyersproducts.com
Phone (440) 974-8888
Fax 800-841-8003
3027020_B
WARRANTY
Buyers Products Co. warrants all truck/trailer hardware manufactured or distributed by it, to be free from defects in material and
workmanship for a period of one year from date of shipment. Parts must be properly installed and used under normal conditions.
Any product which has been altered, including modification, misuse, accident or lack of maintenance will not be considered under
warranty. Normal wear is excluded. The sole responsibility of Buyers Products Co. under this warranty is limited to repairing or replacing any part or
parts which are returned, prepaid, and are found to be defective by Buyers Products Co. Authorization from Buyers Products Co. must be obtained
before returning any part. No charges for transportation or labor performed on Buyers’ products will be allowed under this warranty.
85152
Mini Lightbar Mount
1.
Place bracket on top.
2.
Apply 2 pieces of gasket to the proper components.
3.
Align bolts through existing holes on the bracket and clamp plate.
4.
Secure the bracket by tightening the bolts and nuts firmly. Do
not over torque.
Bill of Materials
ITEM
PART NO.
QTY.
DESCRIPTION
1
3026993
1
Mnt Kit, Mini Lightbar, For Kabgard
2
FCS038016250
2
Screw, HHC 3/8-16 x 2-1/2 GR 5 ZP
3
FWF038081006
4
Washer, Flat 3/8 SAE ZINC
4
FNE038016044
2
Nut, Nylock 3/8-16 x 7/16 ZINC
5
3024851
2
Gasket, Light Bracket
6
3026706
1
Clamp Plate, Kabgard
85176
Traffic Lightbar Mount
Match bolts to track
on rear of lightbar.
Bill of Materials
ITEM
PART NO.
QTY.
DESCRIPTION
1
3026709
2
Clamp Plate
2
3026710
2
Screw, HHC 3/8-16 x 3, GR 5 ZN
3
3026711
4
Washer, Flat 3/8 SAE ZINC
4
FNE031018034
4
Washer, Lock RHS-3/8 ZN
5
FWF031075006
4
Nut, 3/8-16 HEX ZP
Mount the light with the
with hardware provided.
85177
Full-Size Lightbar Mount
1.
Place bracket on top railing with bracket hanging over the cab.
2.
Align bolts through the two existing holes and through the clamping plate.
3.
Secure the bracket by tightening the bolts and nuts firmly. Do not over
torque.
Bill of Materials
ITEM
PART NO.
QTY.
DESCRIPTION
1
3026708
2
Clamp Plate
2
FWF038081006
8
Washer, Flat 3/8
3
FNE038016044
4
Nut, Nylock 3/8-16
4
FCS038016350
4
Screw, HHC 3/8-16 x 3.5
5
3026707
2
Angle, Railing
Mount the light with
the with hardware
provided. Match bolt
to pattern of beacon.
1.
Place bracket on top railing, facing the bed of the truck.
2.
Align bolts through existing holes on the bracket and clamp plate.
3.
Secure the bracket by tightening the bolts and nuts firmly. Do
not over torque.
1
2
3
4
5
6
Mount lightbar
on 2 L-brackets
4
2
3
4
5
6
1
3
5
1
2
3
4
Match bolt pattern
to lightbar holes
