1. FOREWORD
EN
14
11
CHECK FOR DAMAGED PARTS AND AIR LEAKS
If a guard or other part is damaged it should be
carefully checked to determine that it will operate
properly and perform its intended function. Before
further use of the compressor check for alignment of
moving parts, binding of moving parts, breakage of
parts, mountings, air leak and any other conditions
that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced
by an authorized service center unless otherwise
indicated elsewhere in this Instruction Manual.
12
OPERATE THE COMPRESSOR ACCORDING TO THE
INSTRUCTIONS PROVIDED HEREIN
This compressor has been designed and manufactured
exclusively to produce compressed air. Operate the
compressor according to the instructions provided
herein.
13
HANDLE COMPRESSOR CORRECTLY
Operate the compressor according to the instructions
provided herein. Pay attention pointed or sharp objects
do not damage the hose. Never allow the compressor
to be operated by children, individuals unfamiliar with
its operation or unauthorized personnel.
14
KEEP ALL SCREWS, BOLTS AND COVERS TIGHTLY
IN
PLACE
Keep all screws, bolts, and plates tightly mounted.
Check their condtions periodically.
15
KEEP MOTOR AIR VENT CLEAN
The motor air vent must be kept clean. Regularly clean
the vent if the work environment is very dusty.
16
OPERATE COMPRESSOR AT THE RATED VOLTAGE
Operate the compressor at voltages specified on their
nameplates. If using the compressor at a higher voltage
than the rated voltage, it will result in abnormally fast
motor revolution and may damage the unit and burn
out the motor.
17
NEVER USE A COMPRESSOR WHICH IS DEFECTIVE
OR OPERATING ABNORMALLY
If the compressor appears to be operating unusually,
making strange noises, or otherwise appears defective,
stop using it immediately and arrange for repairs by an
authorized service center.
18
DO NOT POSITION WEIGHTS/OBJECTS ON THE
COMPRESSOR (VASES OF FLOWERS, ETC.)
5
6
NO!
