With the purchase of the Batterie-Control-
Booster you have chosen a quality product
from BÜTTNER ELEKTRONIK.
The Batterie-Control-Boosters meet the
highest requirements of the most modern
charging technology for your board battery
and offer 3 operating modes:
•
Booster mode: Board battery charging
while driving from the alternator
•
Mains operation: Board battery charging
and preservation of charge for the starter
battery on 230 V mains supply.
•
Pulser operation: Without mains supply
the pulser counteracts sulphation of Gel,
AGM and lead-acid batteries and thereby
increases the battery life.
Please check the contents of the package
for completeness immediately after ope-
ning. You will find an overview of the scope
of delivery on page 2 in chapter “Scope of
delivery”.
The battery control booster must be set-
up before installation and commissioning.
For more information, please read section
“Settings” on page 12.
We hope you enjoy your new Mobile Tech-
nology Batterie-Control-Booster.
Your BÜTTNER ELEKTRONIK team
Danger!
Warns of dangers to persons, dama-
ge to the device or other objects.
Injuries or damage may result from
improper handling. Failure to do so
can lead to serious damage, fire and
personal injury!
Warning!
!
Tips and Tricks
This icon is used to designate tips,
helping to use your equipment
even easier and more efficient.
Notice
About this manual
With the installation guide on the following
pages, you can put your Batterie-Control-
Booster into operation quickly and easily.
Please read these instructions carefully and
attentively. Pay attention to the safety
instructions in particular to ensure proper
operation of the device.
Scope of Delivery
Quantity
Description
1
MT BCB 30/30, MT 40/40 or MT 60/40
1
Temperature-sensor
1
Extension cable (5 m) and adaptor for remote control
1
Installation- and operation manual
BÜTTNER ELEKTRONIK – Batterie-Control-Booster MT BCB 30/30, MT BCB 40/40, MT BCB 60/40
2
Introduction
i