- 13 -
26. Locate wire clamp 0.750" 15M with insulator (N) and position it around tube (G). Final
tightening and positioning will be done in a later step.
27. Insert the un-slotted end of tube (H) into the slotted end of tube (G) and secure with a # 8 x 1"
screw, lock washer and hex nut.
28. Locate wire clamp 0.625" 15M with insulator (M) and position it around tube (H). Final
tightening and positioning will be done in a later step.
29. Insert the un-slotted end of tube (I) into the slotted end of tube (H) and secure with a # 8 x 1"
screw, lock washer and hex nut.
30. Position wire clamp 0.500" 15M with wire (L) around tube (I) so the top edge is 13-1/2” from
the upper end of the tube.
31. Measure from the rivet of wire clamp 0.500" 15M with wire (L) to a point 11 feet 3 inches along
the stranded wire and mark this point.
