- 12 -
22. Slide the remaining clamp from the above assembly over tube (E) and position it so the coil
support tube L bracket (O1) is even with fourth turn, counting from the top of the 40 meter coil
on the coil assembly 80/40 meter (C) and tighten the hex nut.
23. Hook the coil support tube 30 meter L-bracket (O1) around the fourth turn of the 40 meter coil
on coil assembly 80/40 meter (C). Secure with a # 8 x 3/4" screw, lock washer and hex nut.
Steps 24 through 29 are for installing the 15 meter parts to the antenna. Use the following
diagram to assist in identifying the parts and their proper locations:
24. Position wire clamp 0.875" 15M with insulator (K) around tube (F) and use a # 8 x 1" screw,
lock washer and hex nut finger tight. Final adjustment will be done in a later step.
25. Insert the un-slotted end of tube (G) into the slotted end of tube (F) and secure with a # 8 x 1-
1/4" screw, lock washer and hex nut.
