manualshive.com logo in svg

Butterfly Network Butterfly iQ, User Manual, Page: 9 / 58

Share
Download
Butterfly Network Butterfly iQ User Manual Download Page 9

WARNINGS!

• Use only cables, probes, chargers, and accessories specified for use with Butterfly iQ™. Substi-

tution of non-approved accessories may cause the system to perform improperly or may cause
injury to the patient or operator.

• If the probe seems unusually hot, produces an odor or smoke, or leaks, stop use immediately.

Unplug the probe from the mobile device or disconnect it from the wireless charger (if applica-
ble). Contact Support at: 

[email protected]

• Do not use Butterfly iQ™ in the presence of flammable gases or anesthetics. Doing so can re-

sult in a possible fire or explosion.

• Butterfly iQ™ has not been evaluated or approved for use in hazardous locations as defined in

the National Electric Code standard. In compliance with IEC classification, the Butterfly iQ™ is
not to be used in the presence of flammable substances/air mixtures.

• Do not use the Butterfly iQ™ Application on a mobile device that does not meet minimum re-

quirements. Using the Butterfly iQ™ Application on a mobile device that does not meet the mini-
mum requirements may affect performance and image quality, possibly resulting in misdiagno-
sis.

• Spilling fluids into the system may damage it or present a fire or shock hazard. Do not allow

fluids to enter the device.

• Store only within the range of environmental conditions specified in the technical specifications.

• Dangerous high voltages and currents are present. There are no user-serviceable parts. Do not

open, remove covers, or attempt repair.

• Portable and mobile radio-frequency (RF) communications equipment can affect Medical Elec-

trical Equipment.

• Internet access is required to view the user manual and Butterfly support portal. If you intend to

use Butterfly iQ™ without an internet connection download the user manual locally by visiting

support.butterflynetwork.com

.

• Use of damaged equipment or accessories may cause the device to perform improperly and/or

result in injury to the patient or operator. Refer servicing to qualified service personnel.

• No modification is allowed. Do not modify cables, probes, chargers, or accessories specified for

use with Butterfly iQ™. Modification to equipment may cause the system to perform improperly
or may cause injury to the patient or operator.

CAUTIONS!

• Cardiac rhythm disturbances during cardiac studies using gas ultrasound contrast agents have

been observed in the diagnostic range of Mechanical Index (MI) values. See the specific pack-
age insert for the contrast agent being used for further details.

• Butterfly Cloud enables remote viewing of ultrasound images on a variety of platforms and in

uncontrolled environments (e.g., ambient lighting). Clinician discretion on the appropriate use of
images must be applied.

• Only trained operators should use the instrument for needle placement.

Basic Safety/Usage Environment

Safety Information

9

Summary of Contents for Butterfly iQ



























































Reviews:

No comments