20
21
20
21
• Open the filter holder (4) using the
handle (5).
• Place a coffee filter (size 1 x 4) in
the filter holder and fill with coffee.
• Close the reservoir and filter
holder.
Brewing coffee
• Press the start/stop button (a)
once to start the appliance. The
start/stop indicator (h) will go red,
and the appliance will brew the
coffee.
• Press the start/stop button to
switch the appliance off when
brewing is completed. The start/
stop indicator will go out and the
appliance will be switched off.
• NOTE: The appliance will switch
off automatically approx. 2 hours
after brewing is completed.
Using the timer
To use the automatic timer function,
check that the clock and start time
required are set correctly (see "Setting
the clock/-timer").
• Press the "PRO" button twice, and
check that the start time is correct.
• Press the "AUTO" button (b)
to activate the timer. The timer
indicator (d) will go green. This
means the timer is activated.
• When the start time arrives, the
green light will go out and the
red start/stop indicator light will
come on. The appliance will now
automatically start to brew coffee.
• Press the start/stop button to
switch the appliance off when
brewing is completed. The start/
stop indicator will go out and the
appliance will be switched off.
• NOTE: The appliance will switch
off automatically approx. 2 hours
after brewing is completed.
The appliance has an anti-drip valve
which allows you to remove the glass
pot during brewing to pour a cup of
coffee. When the pot is removed, the
valve closes, keeping the coffee in the
filter holder until it is replaced on the
hot plate again.
NOTE: To stop the coffee in the filter
holder from running over, always
return the pot to the appliance as
quickly as possible. Do not remove the
pot from the appliance for more than
half a minute.
CLEANING
• Before cleaning, remove the plug
from the wall socket and allow to
cool down.
• The filter holder and glass pot can
be washed using normal washing-
up liquid.
• The best way to clean the coffee
maker itself is to wipe it with a
damp cloth using hot water and a
little washing-up liquid.
• Do not use any kind of strong or
abrasive cleaning agent on the
appliance or its accessories. Never
use a scouring sponge or similar
to clean it, as the surface may be
damaged.
• NOTE: The device must not be
submerged in any form of liquid.
DESCALING
The lime content of ordinary tap water
means limescale may gradually be
deposited inside. This limescale may
be loosened using acetic acid (NOT
ordinary vinegar) or descaler, available
in supermarkets, etc.
1. Mix 100 ml acetic acid with
300 ml cold water, or follow the
instructions on the descaler
packaging.
2. Pour the solution into the reservoir
and start the appliance at the
start/stop button.
3. Allow half of the solution to run
through the coffee maker, and then
switch it off for approximately 10
minutes.
4. When the 10 minutes are up,
switch the appliance on again and
allow the remainder of the solution
to run through it.
5. To remove the final residues of
limescale and acetic acid, pour a
potful of cold water into the water
reservoir, switch on and allow the
water to pass through.
6. Pass fresh water through the
machine 3 times (as described in
point 5).
7. The appliance now ready for use.
