Chapter 2
Installation and Setup
Page 2-6
2.3 Belt
Adjustment
2.3.1 Belt
Position
In order to accommodate different size mail pieces, the BK703 is equipped with adjustable
outer belts. This is done by using adjustable belt guides located inside the tabletop. In
order to reposition the outer belts, the following instructions can be referenced:
1. Turn the belt adjustment knob shown in
from the bottom of the tabletop) until the belt guide is free to move.
2. Begin running the transport base at a slow speed. For the BK703-7IB, the power
take-off must be engaged in order for the BK703 transport belts to move.
3. Using the belt adjustment knob, slowly move the belt guide in the direction
desired. This will reposition the outer belt.
4. Turn the belt adjustment knob clockwise until the belt guide is locked in place.
Figure 2-5:
Vacuum Extension Table Bottom View
Buskro Ltd.
BK703 Vacuum Extension Table
