Chapter 2
Installation and Setup
Page 2-7
2.3.2 Belt
Tension
In order to adjust the belt tension, a take-up roller is installed in all BK703 extension
tables. The position of the take-up roller can be controlled by turning two tensioning
screws located on the tabletop (
). A clockwise rotation will result in an increase
in belt tension while a counter-clockwise rotation will result in a decrease in belt tension.
Figure 2-6:
Belt Tension Adjustment
Note:
When adjusting the tension of the belts, it is important to turn both tensioning
screws an equal number of rotations. If this is not done, it is possible to cause the
belts to skew in one direction.
Buskro Ltd.
BK703 Vacuum Extension Table
