background image

4

ENVIRONMENTAL

SYMBOLS

The  rating  plate  on  your  machine  may 
show  symbols.  These  represent  important 
information about the product or instructions 
on its use.

Recycle unwanted materials instead 
of  disposing  of  them  as  waste.  All 
tools,  hoses,  and  packaging  should 
be  resorted,  taken  to  the  local 
recycling  center  and  disposed  of  in 
an environmentally safe way.

  

R e a d   t h e s e   i n s t r u c t i o n s 
carefully.

Wear eye protection. 
Wear hearing protection.

Wear protective gloves. 

Wear safety footwear.

Do  not  remove  or  tamper 
with the protection and safety 
devices.

Don’t  stand  or  sit  on  the  log 
splitter.

Operate  the  log  splitter  on 
level  surfaces.  Stay  off  slopes 
and slippery surfaces.

Do  not  touch  parts  that  are 
hot  from  operation.  Serious 
burns may result.

No smoking, sparks, or flames.

Properly dispose of waste oil!

HYDRAULIC

 OIL 

FILLING

MAX.

MIN.

REVERSE

FORWARD

N

Keep children and bystanders 

off and away from the log 

splitter.

Be  sure  the  engine's  switch  is 

off  before  transporting  the

machine  or  performing  any

maintenance.

Keep hands and fingers away 

from all pinch points.

Never  remove  partially  split 

wood  from  the  wedge  with 

your  hands.  Fingers  may 

become  trapped  between  the 

split wood.

Keep 

hands 

away 

from 

moving  parts.  Moving  parts 

can crush or cut.

Keep  feet  away  from  moving 

parts.  Moving  parts  can  crush 

or cut.

Always  keep  body  and  hands 

away from pin holes or nozzles 

that eject hydraulic fluid under 

pressure.  Escaping  hydraulic 

fluid  can  puncture  skin  and 

cause blood poisoning.

Thrown objects.

Check and fill hydraulic oil.

Follow the direction indicated 

to use the control lever.

For  logs  that  are  not  cut 

square,  the  longest  portion  of 

the  log  should  be  rotated 

down  and  the  most  square 

end  placed  toward  the  end 

plate.

LOG SPLITTER

Summary of Contents for LS301





























Reviews: