![background image](http://html.mh-extra.com/html/bushranger/aht261/aht261_owners-operators-manual_2835614010.webp)
_
9
_
Operating Hedge Trimmer
Operating Position
Before using the Hedge Trimmer, check the following:
1. The unit should be on operator’s right side.
2. The operator’s right hand should be holding the shaft grip, with his or her fingers on the throttle trigger.
The right arm should be slightly bent.
3. The left hand should be holding the loop handle with the fingers and thumb fully enclosed around the
grip. Reposition the loop handle up or down the shaft assembly if necessary for a comfortable position.
4. The Hedge Trimmer weight should be evenly distributed between the arms.
Red Band
Shoulder
Strap
Hook
Ring
Pull
5. Make sure the blades are moving (at least half throttle) before
actual cutting begins. The Hedge Trimmer performs best at full
throttle.
6. Always release the throttle trigger and allow the engine to return to
speed when not cutting.
7. Stop the engine when moving between work sites.
・
If the blades becomes jammed, stop the engine immediately.
・
Make certain all moving parts have stopped and disconnect the
spark plug before inspecting the equipment for damage.
・
Never use a unit that has chipped, cracked or broken blades.
IMPORTANT:
The thickness of branches which may be cut using this hedge
trimmer is limited to up to approximately 4.5mm. Never try to cut
branches thicker than this, as doing so may result in damage to
the hedge trimmer.
8. When transporting the Hedge Trimmer always fit the blade cover.
IMPORTANT:
To detach the shoulder strap quickly from the Hedge Trimmer,
pull upward on the red band.
CAUTION
Read the Safety instructions beginning on page 3 concerning proper use of the Hedge Trimmer.
CAUTION
・
Do not touch the sharpened edges of the blades. The blades are extremely sharp and danger-
ous at all times. Always wear gloves and protective clothing.