![background image](http://html.mh-extra.com/html/bushranger/aht261/aht261_owners-operators-manual_2835614006.webp)
_
5
_
Attaching the Shoulder Strap
Snap the hook into the ring on the shaft assembly. To detach the
shoulder strap quickly from the Hedge Trimmer, pull upward on the
red band.
Before Operation
Engine Oil and Fuel
1. Mix and pour fuel outdoors and where there are no sparks or flames.
2. Always shut off the engine before refueling. Never remove the Hedge Trimmer fuel tank cap while the
engine is running or immediately after stopping the engine.
3. Always open the fuel tank cap slowly to release any possible pressure
inside the tank.
4. Do not overfill the fuel tank. Stop filling 10mm from the top of the tank.
5. Tighten the fuel tank cap carefully but firmly after refilling.
6. Wipe up any spilled fuel before starting the engine.
7. Move the Hedge trimmer at least 3m (10ft.) away from the fueling location
and fuel storage container before starting the engine.
3m(10ft.)
Minimum
5. Adjust the cable adjuster sleeve so the stop on the carburetor throttle cam just contacts the throttle stop
and the cable position keep 1-2mm play between cable lug and slotted fittings when the throttle trigger is
fully depressed.
6. When the throttle cable is adjusted correctly, tighten the lock-nut.
7. Plug the stop switch wires into the matching connectors from the engine.
Note: That wire polarity is not important.
8. Lap and fix the stop switch wires and connectors with clamp.
Throttle Cable
Cable Lug
Carburetor
Bracket
Slotted Fitting
Lock Nut
Recessed Hole
Cable Adjuster Sleeve
WARNING
POTENTIAL HAZARD
・
Petrol contains gasses that can build up pressure inside a fuel tank.
WHAT CAN HAPPEN
・
Fuel can be sprayed on you when removing fuel tank cap.
HOW TO AVOID THE HAZARD
・
Remove fuel tank cap slowly to avoid injury from fuel spray. .
Carburetor
Bracket
1-2mm Play
Stop Switch Wires
Clamps
Red Band
Shoulder
Strap
Hook
Ring
Pull